Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any scientific information contained within this essay should not be treated as fact, this content is to be used for educational purposes only and may contain factual inaccuracies or be out of date.

Solar Cell and Solar Energy Materials

Paper Type: Free Essay Subject: Chemistry
Wordcount: 3462 words Published: 30th Nov 2017

Reference this


One of the biggest challenges to mankind is highly depended on the decreasing fusil fuels such as oil, coal, natural gas. Fusil fuels are nonrenewable energy resource which usually takes million of years to form. As a result, their reserves are depleted much faster than it forms. Furthermore, the combustion of these fuels causes environmental degradation through air pollution and global warming. Combustion of carbon-based fossil fuels creates not only air pollutants, for example, sulfur oxides, nitrogen odixe and heavy metals, but also carbon di-oxide, the notorious greenhouse gas widely considered to be the number one culprit of global climate change.[1] In order to protect our environment and provide energy security, energy generated from renewable sources has been extensively studied.[2] Though it will take some decades to come close to a truly sustainable energy system, the research is being conducted to find solutions to (1) increase efficiency in production, transmission, and utilization of the remaining fossil fuels, (2) reduce negative impacts to the environment, and (3) develop or improve technologies and infrastructure for the smooth transition to the alternative/ renewable energy sources (e.g., nuclear power, solar energy, wind power, geothermal energy, biomass and biofuels, and hydropower).[3] Among those, solar energy has many advantages such as availability and lower cost. The search and synthesis for low cost solar cell materials made of earth abundant elements has been a topic of extensive study across the globe.

A brief historical background:

In 1839,the photovoltaic effect was discovered by French physicist, Alexandre-Edmond Becquerel. He constructed the world’s first photovoltaic cell in his father’s laboratory at age nineteen, which was the beginning of solar energy materials technology. This experiment was done by illuminating two electrodes, which were coated by light sensitive semiconducting materials, with different types of light. He observed that electricity increases with the increase of light intensity. Then an English electrical engineer, Willoughby Smith, was discovered the photo conductivity of selenium in 1873. In 1883,Charles Fritts built the first true solar cells made from selenium wafer which is coated with a thin layer of gold. He found that the efficiency was only about 1%. In 1905, Albert Einstein published in a paper that light consists of “packets” or quanta of energy, which can be varied only with its frequency.[4] This theory was very simple, but revolutionary that explained the data of photoelectric effect. The photoelectric effect was experimentally proved by an American experimental physicist, Robert Andrews Millikan, who later won the Nobel Prize for the photoelectric effect and measurement of the charge of the electron. In 1954, a single-crystal cell of germanium and a cadmium sulphide p-n junction was developed with an efficiency of 6%. Later the University of Delaware found that the efficiency exceeds 10% with the first thin film solar cell which was made of copper sulfide and cadmium sulfide in 1980. In 2007,they achieved 42.8% efficiency in solar cell technology.[5] To date, the highest 44.8% efficiencies have been achieved by using multiple junction solar cells.

Solar cell:

Solar cell is electrical device which converts solar radiation into electricity by photoelectric effect. It consists of two types of semiconducting materials, one is n-type and another is p-type. When these two types of materials placed with each other, it forms depletion layer at middle of these two materials. When sun light falls on the depletion layer the materials absorb photon and the electron from filled valence band excites to the unfilled conduction band, which creates a hole and electron pair. The hole goes to the p-type conductor and the electron goes to the n-type conductor. If we complete the circuit by connecting these two materials we will see there is flow of electricity. [6]

Fig 1: A schematic diagram of solar cell

Some important Solar cell and solar energy materials

Solar cells are typically consists of semiconducting materials and these cells are named after thesemiconducting materialsthey are made of. Thesematerialsmust have certain characteristics in order to absorbsunlight. Some solar cells are designed to absorb sunlight that reaches the Earth’s surface, while others are constructed foruse in space. Solar cells can be made of only one layer of light absorbing semiconducting material which is called single-junction. Sometimes cells can be made of multiple layers of semiconducting materials to take advantage of wide range of absorption and charge separation mechanisms which is called multi-junction.

Solar cells can be classified into three categories according to generation:

  1. The first generation cells also called traditional, conventional orwafer based cells that are made ofcrystalline silicon which includes materials such asmono-crystalline and poly-silicon silicon.
  2. Second generation cells arethin film solar cells, that includeamorphous silicon,CdTeandCIGScells and are commercially significant in utility-scale photovoltaic power stations,building integrated photovoltaicsor in smallstand alone devices.
  3. The third generation of solar cells includes a number of thin-film technologies often described as emerging photovoltaics which are not yet commercially applied and are still in the research or development phase such as perovskite solar cells and quantum dots solar cells.

Crystalline silicon

The most prevalent bulk material for solar cells iscrystalline silicon(c-Si), also known as “solar grade silicon”. Bulk silicon is separated into two categories according to crystallinity and crystal size.

  1. Mono-crystalline silicon

  1. Polycrystalline silicon

In 1981, the first solar panels based on polycrystalline silicon, which also is known as polysilicon (p-Si) and multi-crystalline silicon (mc-Si),was introduced to the market. Unlike monocrystalline-based solar panels, polycrystalline solar panels do not require the Czochralski process. Raw silicon is melted and poured into a square mold, which is cooled and cut into perfectly square wafers. Polysilicon cells are the most common type used in photovoltaics and are less expensive, yet less efficient than those made from monocrystalline silicon.

Thin film

Thin film technologies reduce the amount of active material in a cell. Most designs sandwich active material between two panes of glass. Since silicon solar panels only use one pane of glass, thin film panels are approximately twice as heavy as crystalline silicon panels, although they have a smaller ecological impact.[8]The majority of film panels have 2-3 percentage points lower conversion efficiencies than crystalline silicon. Cadmium telluride(CdTe),copper indium gallium selenide(CIGS) andamorphous silicon(a-Si) are three thin-film technologies often used for outdoor applications. CIGS technology laboratory demonstrations reached 20.4% as of December 2013. The lab efficiency of GaAs thin film technology topped 28%. Thequantum efficiencyof thin film solar cells is also lower due to reduced number of collected charge carriers per incident photon. Most recently, CZTS solar cell emerge as the less-toxic thin film solar cell technology, which achieved ~12% efficiency.

Cadmium telluride

Cadmium telluride is the only thin film material so far to rival crystalline silicon in cost/watt. However cadmium is a highly toxic andtelluriumsupplies are limited. Thecadmiumpresent in the cells would be toxic if released. However, release is impossible during normal operation of the cells and is unlikely during fires in residential roofs.[9]A square meter of CdTe contains approximately the same amount of Cd as a single C cellnickel-cadmium battery, in a more stable and less soluble form.[9]

Copper indium gallium selenide

Copper indium gallium selenide (CIGS) is adirect band gapmaterial. It has the highest efficiency (~20%) among all commercially significant thin film materials. Traditional methods of fabrication involve vacuum processes including co-evaporation and sputtering. Recent developments atIBMandNanosolar attempt to lower the cost by using non-vacuum solution processes.

Gallium arsenide thin film

The semiconductor materialGallium arsenide(GaAs) is also used for single-crystalline thin film solar cells. Although GaAs cells are very expensive, they hold the world’s record in efficiency for asingle-junctionsolar cell at 28.8%.[10]GaAs is more commonly used inmultijunction photovoltaic cellsforconcentrated photovoltaics and forsolar panels on spacecrafts, as the industry favours efficiency over cost forspace-based solar power.

Perovskite solar cells

The name ‘perovskite solar cell’ is derived from the ABX3crystal structureof the absorber materials, which is referred to as perovskite structure. The most commonly studied perovskite absorber is methylammonium lead trihalide (CH3NH3PbX3, where X is ahalogenion such asI−,Br−,Cl−). Formamidinumlead trihalide (H2NCH3NH3PbX3) is a recently studied newer material which shows promise, with a bandgap between 2.23eV and 1.48eV. This minimum bandgap is closer to the optimal for asingle-junction cellthan methylammonium lead trihalide, so it should be capable of higher efficiencies. The efficiencies of perovskite solar cell have increased to 12.8% in 2014.[11] This increased efficiency is making them a very rapidly advancing technology and a hot topic in the solar cell field. Perovskite solar cells are also forecast to be extremely cheap to scale up, making them a very attractive option for commercialization.

Quantum dots semiconductor solar cell:

Quantum dots are tiny particles or nanocrystals of a semiconducting material with diameters in the range of 2-10 nanometers. Due to high surface to volume ratios for these particles, quantum dots display unique electronic properties, intermediate between those of bulk semiconductors and discrete molecules. Due to their small size, the electrons in quantum dots are confined in a small space which is called quantum box. When the radii of the semiconductor nanocrystal is smaller than the exciton Bohr radius (exciton Bohr radius is the average distance between the electron in the conduction band and the hole it leaves behind in the valence band), there is quantization of the energy levels according to Pauli’s exclusion principle (Figure 1).[12][13]The discrete, quantized energy levels of quantum dots relate them more closely to atoms than bulk materials. Generally, as the size of the crystal decreases, the difference in energy between the highest valence band and the lowest conduction band increases. More energy or more energy light is then needed to excite an electron from valance band to conduction band. Therefore, the properties of semiconducting materials can be tuned by changing the size of the quantum dots. By using different sized quantum dots in multi-layer junction we can absorb wide range of light.


Figure 4: Splitting of energy levels in quantum dots due to the quantum confinement effect, semiconductor band gap increases with decrease in size of the nanocrystal.[12][13]


The primary energy sources: coal, oil and natural gas are fossil fuels are polluting our environment. Furthermore, these resources are quickly depleting and becoming extremely expensive day by day. Therefore, weneedtoconsiderrenewableenergysources such as solar energy, by using solar cells we cangenerate electricalpower by converting solar energy intoelectricity.


  1. Wang, Zhong Lin.Nanotechnology for the energy challenge. Ed. Javier García-Martínez. John Wiley & Sons, 2013.
  2. Hou, Yu, Ruxandra Vidu, and Pieter Stroeve. “Solar energy storage methods.”Industrial & Engineering Chemistry Research50.15 (2011): 8954-8964.
  3. Moniz, E. J.; Garcia-Martinez, J. Nanotechnology for the Energy Challenge; Wiley-VCH: Weinheim, Germany, 2010
  4. Einstein, Albert. “The photoelectric effect.”Ann. Phys17 (1905): 132.
  5. Delaware University, US, HP http://www.udel.edu/PR/ UDaily/2008/jul/solar072307 .html
  6. Li, Zhongrui, et al. “Light-harvesting using high density p-type single wall carbon nanotube/n-type silicon heterojunctions.”Acs Nano3.6 (2009): 1407-1414.
  7. Green, M. A. “Recent developments in photovoltaics.”Solar energy76.1 (2004): 3-8.
  8. Pearce, Joshua, and Andrew Lau. “Net energy analysis for sustainable energy production from silicon based solar cells.”ASME Solar 2002: International Solar Energy Conference. American Society of Mechanical Engineers, 2002.
  9. Fthenakis, Vasilis M. “Life cycle impact analysis of cadmium in CdTe PV production.”Renewable and Sustainable Energy Reviews8.4 (2004): 303-334.
  10. Yablonovitch, E., O. D. Miller, and S. R. Kurtz. “The opto-electronic physics that broke the efficiency limit in solar cells.”Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE. IEEE, 2012.
  11. Qin, Peng, et al. “Perovskite Solar Cells with 12.8% Efficiency by Using Conjugated Quinolizino Acridine Based Hole Transporting Material.”Journal of the American Chemical Society(2014).
  12. Reimann, S. M.; Manninen, M. Reviews of Modern Physics, 2002, 74(4), 1283.
  13. Bawendi, M. C.; Steigerwald, M. L.; Brus, L. E. Annual Review of Physical Chemistry, 1990, 41, 477.


Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: